SØG - mellem flere end 8 millioner bøger:
Viser: Solution Precursor Plasma Spray System
Solution Precursor Plasma Spray System
Noppakun Sanpo
(2016)
Sprog: Engelsk
Detaljer om varen
- Paperback
- Udgiver: Springer International Publishing AG (September 2016)
- ISBN: 9783319353326
2.6.1 Mineral processing examples of using chelating agents
2.6.2 Polymeric chelating agent
2.6.3 Organic acids
2.6.4 Summary of benefits and detriments of chelating agents
2.7 Introduction of thermal spray technology
2.7.1 Thermal spray techniques
2.7.2 Plasma
2.8 The phenomena controlling the plasma jet
2.8.1 Plasma torches used for suspension or solution spraying
2.8.2 Radio frequency plasma torches
2.9 Feedstock delivery systems
2.9.1 Spray atomization
2.9.2 Powder feeding systems
2.9.3 Gravity-based devices
2.9.4 Rotating wheel devices
2.9.5 Fluidized-bed systems
2.9.6 Liquid feeding systems
2.10 Quality control and feedstock material specification
2.11 Physical and chemical phenomena with liquid feedstock Thickness of thermal sprayed coatings
2.15 Concluding remarks
3. Experimental methods
3.1 Solution precursor preparation (Vary the types of chelating agent
3.2 Solution precursor preparation (Vary the concentrations of chelating agent)
3.3 Plasma spray parameters
3.4 Plasma spray cobalt ferrite splats characterizations
3.4.1 Image analysis
3.4.2 Scanning electron microscopy analysis
3.4.3 Energy dispersive X-ray spectrometry
3.4.4 Raman spectroscopy
3.4.5 Differential scanning calorimetry
4. Influence of the different organic chelating agents on the topography, physical properties and phase of SPPS-deposited spinel ferrite splats
4.1 Introduction
4.1.1 Chelating agents
4.1.2 Thermal spray processing of ferrite coatings
4.1.3 Techniques to examine phases
4.2 Results and discussion
4.2.1 Splat topography
4.2.2 The Co:Fe ratio
4.2.3 Statistical analysis of splat morphologies
4.2.4 3D profiler analyses
4.2.5 Roughness parameters
4.2.6 Image analyses
4.2.7 Raman spectroscopy analyses
4.2.8 Effect of the different types of chelating agents
4.3 Conclusions
5. Effect of the chelating agent contents on the topography composition and phase of SPPS-deposited cobalt ferrite splats
5.1 Introduction
5.1.1 Thermal spray processing of ferrite coatings
5.1.2 Single splat behavior
5.2 Results and discussion
5.2.1 Splat topography
5.2.2 Statistical analysis of splat morphologies
5.2.3 3D profiler analyses
5.2.4 Image analyses
5.2.5 DSC/TGA analyses
5.2.6 Raman spectroscopy analyses
5.2.7 Effect of the chelating agent contents
5.3 Conclusions
6. Conclusions
6.1 Overview
6.2 Plasma spray cobalt ferrite splats
6.2.1 Effect of different chelating agent
6.2.2 Effect of chelating agent contents
7. Future perspectives 101
7.1 Study of plasma spray cobalt ferrite splats
7.2 Proposed application of plasma spray cobalt ferrite splats.