SØG - mellem flere end 8 millioner bøger:
Viser: Feedback control techniques
Feedback control techniques
Jens Christian Andersen, Henrik Niemann og Ilmar Santos
(2022)
Sprog: Engelsk
Polyteknisk Forlag
548,00 kr.
493,20 kr.
Flere end 10 stk på lager
Hvor kan jeg afhente varen?
Feedback control techniques Vital Source e-bog
Jens Christian Andersen, Henrik Niemann og Ilmar Santos
(2022)
Polyteknisk Forlag
296,00 kr.
266,40 kr.
Leveres umiddelbart efter køb
Feedback control techniques Vital Source e-bog
Jens Christian Andersen, Henrik Niemann og Ilmar Santos
(2022)
Polyteknisk Forlag
250,00 kr.
225,00 kr.
Leveres umiddelbart efter køb
Søgbar e-bog
Feedback control techniques Vital Source e-bog
Jens Christian Andersen, Henrik Niemann og Ilmar Santos
(2022)
Polyteknisk Forlag
455,00 kr.
409,50 kr.
Leveres umiddelbart efter køb
Detaljer om varen
- 1. Udgave
- Hardback: 424 sider
- Udgiver: Polyteknisk Forlag (Juli 2022)
- Forfattere: Jens Christian Andersen, Henrik Niemann og Ilmar Santos
- ISBN: 9788750200895
Feedback control techniques - a PID design handbook
The authors’ intention is to promote an understanding of control loops, particularly PID (Proportional, Integral and Differential) based control loops, not just the design tools.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere. The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
The authors’ intention is to promote an understanding of control loops, particularly PID (Proportional, Integral and Differential) based control loops, not just the design tools.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere. The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
Detaljer om varen
- 1. Udgave
- Vital Source 365 day rentals (fixed pages)
- Udgiver: Polyteknisk Forlag (August 2022)
- Forfattere: Jens Christian Andersen, Henrik Niemann og Ilmar Santos
- ISBN: 9788750200901R365
The authors’ intention is to promote an understanding of control loops, particularly PID (Proportional, Integral and Differential) based control loops, not just the design tools.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere.
The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere.
The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
Licens varighed:
Bookshelf online: 5 år fra købsdato.
Bookshelf appen: 5 år fra købsdato.
Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)
Bookshelf online: 5 år fra købsdato.
Bookshelf appen: 5 år fra købsdato.
Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)
Detaljer om varen
- 1. Udgave
- Vital Source 180 day rentals (fixed pages)
- Udgiver: Polyteknisk Forlag (August 2022)
- Forfattere: Jens Christian Andersen, Henrik Niemann og Ilmar Santos
- ISBN: 9788750200901R180
The authors’ intention is to promote an understanding of control loops, particularly PID (Proportional, Integral and Differential) based control loops, not just the design tools.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere.
The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere.
The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
Licens varighed:
Bookshelf online: 180 dage fra købsdato.
Bookshelf appen: 180 dage fra købsdato.
Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)
Bookshelf online: 180 dage fra købsdato.
Bookshelf appen: 180 dage fra købsdato.
Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)
Detaljer om varen
- 1. Udgave
- Vital Source searchable e-book (Fixed pages)
- Udgiver: Polyteknisk Forlag (August 2022)
- Forfattere: Jens Christian Andersen, Henrik Niemann og Ilmar Santos
- ISBN: 9788750200901
The authors’ intention is to promote an understanding of control loops, particularly PID (Proportional, Integral and Differential) based control loops, not just the design tools.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere.
The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
A control loop consists of a controller, a system to control and feedback from a measured output back to the controller. The system could be controllable using, e.g. a valve or a motor voltage, and the output measurement could be, e.g. a temperature or a velocity. The controller is then to ensure that the output reaches the desired value.
The book covers Laplace, transfer functions, modelling, controller design based on frequency analysis and handling of stability, limited systems and disturbances.
This textbook is intended for a course in PID-type control design for engineering students at the university level.
The chapters are intended to be self-contained, i.e. limiting the reference to earlier chapters, to allow chapters to be skipped if competencies covered by these chapters are obtained elsewhere.
The independent chapters allow the book to be used for self-study and as a handbook.
In one of the last chapters, z-transform is introduced briefly to allow the frequency domain controller design to be digitally implemented.
Licens varighed:
Bookshelf online: 5 år fra købsdato.
Bookshelf appen: ubegrænset dage fra købsdato.
Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)
Bookshelf online: 5 år fra købsdato.
Bookshelf appen: ubegrænset dage fra købsdato.
Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)
De oplyste priser er inkl. moms
Andre har også købt:
Engineering Vibration...
Af Daniel J. Inman
Af Daniel J. Inman
Pris: 694,00 .kr
Rabatpris: 624,60 kr.
Rabatpris: 624,60 kr.
Incropera's Principle...
Af Theodore L. Berg...
Af Theodore L. Berg...
Pris: 477,00 kr.
Differential equation...
Af Ole Christensen
Af Ole Christensen
Pris: 200,00 .kr
Rabatpris: 180,00 kr.
Rabatpris: 180,00 kr.
Butikker og åbningstid
Handler du som firma
Forretningsbetingelser
Porto og forsendelse
Data & cookiepolitik
Handler du som firma
Forretningsbetingelser
Porto og forsendelse
Data & cookiepolitik
Polyteknisk Boghandel og Forlag A/S - Anker Engelundsvej 1 - 2800 Lyngby
Tlf 77 42 43 44 - email poly@polyteknisk.dk - CVR 34072655 - Sydbank Reg: 6748 Konto 0001107927
Tlf 77 42 43 44 - email poly@polyteknisk.dk - CVR 34072655 - Sydbank Reg: 6748 Konto 0001107927