SØG - mellem flere end 8 millioner bøger:

Søg på: Titel, forfatter, forlag - gerne i kombination.
Eller blot på isbn, hvis du kender dette.

Viser: Facilities Planning and Design: Pearson New International Edition

Facilities Planning and Design: Pearson New International Edition, 1. udgave

Facilities Planning and Design: Pearson New International Edition Vital Source e-bog

Alberto Garcia-Diaz og J. MacGregor Smith
(2013)
Pearson International
425,00 kr. 382,50 kr.
Leveres umiddelbart efter køb
Facilities Planning and Design: Pearson New International Edition, 1. udgave

Facilities Planning and Design: Pearson New International Edition Vital Source e-bog

Alberto Garcia-Diaz og J. MacGregor Smith
(2013)
Pearson International
297,00 kr. 267,30 kr.
Leveres umiddelbart efter køb
Facilities Planning and Design: Pearson New International Edition, 1. udgave

Facilities Planning and Design: Pearson New International Edition Vital Source e-bog

Alberto Garcia-Diaz og J. MacGregor Smith
(2013)
Pearson International
212,00 kr. 190,80 kr.
Leveres umiddelbart efter køb
Facilities Planning and Design - Pearson New International Edition

Facilities Planning and Design

Pearson New International Edition
Alberto Garcia-Diaz og J. MacGregor Smith
(2013)
Sprog: Engelsk
Pearson Education, Limited
777,00 kr. 699,30 kr.
På lager, Bestil nu og få den leveret
om ca. 2 hverdage
Facilities Planning and Design: Pearson New International Edition, 1. udgave

Facilities Planning and Design: Pearson New International Edition Vital Source e-bog

Alberto Garcia-Diaz
(2013)
Pearson International
618,00 kr. 556,20 kr.
Leveres umiddelbart efter køb
  • Klik for at bedømme:
  • 0.0/6 (0 bedømmelser)

Detaljer Om Varen

  • 1. Udgave
  • Vital Source leje e-bog 365 dage: 472 sider
  • Udgiver: Pearson International (Oktober 2013)
  • Forfattere: Alberto Garcia-Diaz og J. MacGregor Smith
  • ISBN: 9781292053110R365

For undergraduate courses in facilities planning and material handling.

 

Based on ten years' teaching experience, this text takes a practical, teachable approach to facilities planning and design. A class design project centered on a factory incorporates the theoretical aspects of facilities planning and design. Motivating and illustrating mathematical models wherever possible, the text explores facilities planning, capstone design, and even simulation modelling.

Licens varighed:
Online udgaven er tilgængelig: 365 dage fra købsdato.
Offline udgaven er tilgængelig: 365 dage fra købsdato.

Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)

Detaljer Om Varen

  • 1. Udgave
  • Vital Source leje e-bog 180 dage: 472 sider
  • Udgiver: Pearson International (Oktober 2013)
  • Forfattere: Alberto Garcia-Diaz og J. MacGregor Smith
  • ISBN: 9781292053110R180

For undergraduate courses in facilities planning and material handling.

 

Based on ten years' teaching experience, this text takes a practical, teachable approach to facilities planning and design. A class design project centered on a factory incorporates the theoretical aspects of facilities planning and design. Motivating and illustrating mathematical models wherever possible, the text explores facilities planning, capstone design, and even simulation modelling.

Licens varighed:
Online udgaven er tilgængelig: 180 dage fra købsdato.
Offline udgaven er tilgængelig: 180 dage fra købsdato.

Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)

Detaljer Om Varen

  • 1. Udgave
  • Vital Source leje e-bog 90 dage: 472 sider
  • Udgiver: Pearson International (Oktober 2013)
  • Forfattere: Alberto Garcia-Diaz og J. MacGregor Smith
  • ISBN: 9781292053110R90

For undergraduate courses in facilities planning and material handling.

 

Based on ten years' teaching experience, this text takes a practical, teachable approach to facilities planning and design. A class design project centered on a factory incorporates the theoretical aspects of facilities planning and design. Motivating and illustrating mathematical models wherever possible, the text explores facilities planning, capstone design, and even simulation modelling.

Licens varighed:
Online udgaven er tilgængelig: 90 dage fra købsdato.
Offline udgaven er tilgængelig: 90 dage fra købsdato.

Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)

Detaljer Om Varen

  • Paperback: 472 sider
  • Udgiver: Pearson Education, Limited (November 2013)
  • Forfattere: Alberto Garcia-Diaz og J. MacGregor Smith
  • ISBN: 9781292042893
For undergraduate courses in facilities planning and material handling. Based on ten years' teaching experience, this text takes a practical, teachable approach to facilities planning and design. A class design project centered on a factory incorporates the theoretical aspects of facilities planning and design. Motivating and illustrating mathematical models wherever possible, the text explores facilities planning, capstone design, and even simulation modelling.
Fundamental Principles of Facilities Planning and Design
1.
1 Introduction
What is Design Characteristics of Design Problems Design Program Design Process
1.
2 Hierarchical Cycle of Facilities Planning
1.
3 Objectives of Facilities Planning Issue-Based Information Systems Site-Planning IBIS Example Decision-Support (DSS) Computer Programs
1.
4 Mathematical Models in Facility Planning
1.
5 Manufacturing Systems Concepts
1.
6 Types of Basic Manufacturing Layouts Fixed-Position Layout Product Layout Process Process Layout Process Cellular Layout Process
1.
7 Service Systems
1.
8 Renovation or Reengineered Facilities
1.
9 Facilities Planning and Design Constraints
1.
10 Summary and Conclusion
1.
11 Exercises References Factory Layout and Material Handling Project
2.
1 Introduction
2.
2 Project Overview Computerized Format Files Basic Documents Project Report
2.
3
Section I: Product Analysis Production Drawings Parts List and Identification System Assembly Flowchart
2.
4
Section II: Parts Manufacturing Route Sheets Machine Requirements and Costs Machine Requirements Machine Costs Material Requirements Machine Drawings
2.
5
Section III: Layouts Planning Layout Planning Charts Material handling Requirements and Costs
2.
6
Section IV: Personnel Planning Personnel Requirements and Costs Unit Costs
2.
7
Section V: Office Layout
2.
8
Section VI: Recommended Plant Layout Product Design and Process Planning
3.
1 Market Research Types of Market Research Qualitative Forecasting Methods Quantitative Forecasting Methods
3.
2 Product Design Product Design Process Bill of Materials or part List Component Part Drawing Assembly Drawing
3.
3 Product Design Concurrent Engineering Quality Function Deployment Value Analysis
3.
4 Factory Design Project:
Section I. Product Design What Product? What Parts Compose the Product? Guidelines Report Organization
3.
5 Process Planning Process Planning Procedure Selection of Manufacturing Sequencing of Manufacturing Processes
3.
6 Types of Process Planning Manual Process Planning Variant Process Planning Generative Process Planning Generative Process Planning (GPP) Semigenerative Process Planning Computer-Aided Manufacturing
3.
7 Schedule
3.
8 Factory Design Project:
Section II. Process Design Guidelines Organization of Report
3.
9 Summary
3.
10 Exercises References Layout Planning Procedures
4.
1 Introduction
4.
2 Systematic Layout Planning
4.
3 From-To Program
4.
4 Production Flow Analysis Overview of Conceptual Approach Integration of SLP and PFA
4.
5 Flow Planning
4.
6 Layout Planning Chart
4.
7 Space Requirements
4.
8 Facility Layout (FLAP) Description and Illustration of Procedure Facilities layout Program (FLAP): User Instructions
4.
9 Summary
4.
10 Exercises References Location Models in facility Planning
5.
1 Single-Facility Location Model Minisum Location Problem with Rectilinear Distances Extension to Rectangular Areas Minimax Location Model for Single Facility Minimax Location Problem for Rectilinear Distances
5.
2 Location-Allocation Problem Mathematical Model Solution Procedure
5.
3 Quadratic Assignment Problem (QAP)
5.
4 Heuristic Methods for Solving the QAP Incremental Cost after adding a new facility Pairwise Interchange Heuristic Construction Procedure Heuristic Improvement Procedure
5.
5 Exercises Computerized Layout Procedures
6.
1 Introduction
6.
2 Scope and Definitions
6.
3 Facility Layout Software Issues
6.
4 Exact QAP and GTLN Optimization Procedures Exact Graph-Theoretic Procedures
6.
5 Heuristic Procedures Improvement Procedures Improvement Algorithms Construction Procedures
6.
6 Quadratic Set Packing Models Problem Statement and Objective Branch-and-Bound Algorithm Manufacturing Layout Solution Factory Project Examples
6.
7 STEP Algorithm Stochastic Examples Algorithm Sampling test and Pairwise Exchange Procedure The Concept of the Sampling Test Computational Results Factory Project Example
6.
8 Summary
6.
9 Exercises References Material Handling Principles, Equipment, and System Design
7.
1 Introduction
Motivation
7.
2 Scope and Definitions
7.
3 Principles of Material Handling (PAS1 S 2AGES) Unit Load Principle S2
7.
4 Designing Material Handling Systems (MHS)
7.
5 Material Handling Equipment Conveyors Monorails, Hoists, and Cranes Industrial Trucks
7.
6 MHS Decision-Support Tool Architecture of the Application The Knowledge Base Development of Knowledge Base Developing the Decision-Support System Advantages of DSS Two-Step Approach Limitations of Existing Expert Systems Decision-Support System for Material Handling Equipment Selection Flow of the Application DSS Stage II for Cranes Final Synthesis
7.
7 Factory Design Project:
Section III. Layout Planning and Material Handling Layout Planning Chart Material Handling Requirements Material Handling Costs Proposed Layout Sample Calculations Report Organization Initial Layout Material handling Requirements and Costs
7.
8 Summary and Conclusion
7.
9 Exercises References Material Handling Systems Analysis
8.
1 Introduction
Motivation
8.
2 Integration of Layout and Material Handling System Fundamental Integration Principle Case Study Addenda to
Section III of Project
8.
3 Open Network System Design Tool: GQnet GQnet Basic Assumptions GQnet Algorithm GQnet Computational Results
8.
4 Closed-Loop Conveyor Systems Overview Deterministic Conveyor Model Conveyor Example Stochastic Analytical Approaches Algorithms Computer Experiments
8.
5 Simulation Models Introduction
Cellular Methodology Simulation Section Outline Background of Case Study Individual Cell Simulation Model Cell Network Study
8.
6 Warehouse Simulation Motivation Background Problem Description Layout of factory
8.
7 Summary and Conclusions
8.
8 Exercises References Storage and Warehouse Systems
9.
1 Introduction
9.
2 Receiving and shipping Receiving and Putaway Operations Processing Customer Orders Order Picking Packing and Shipping Cross Docking
9.
3 Dedicated and Random Storage Dedicated Storage Random Storage
9.
4 Models for Determining Storage Capacity Service-Level Approach Cost-Based Approach
9.
5 Storage-Capacity Determination Randomized Storage Policy
9.
6 Dock Planning and Design Dock Location Types of Docks Dock Design Dock Levelers Dock Safety
9.
7 Warehouse Systems Design Storage Equipment Carousels Rack Storage Systems
9.
8 Automated Storage and Retrieval Systems (AS/RS)
9.
9 Exercises References Site-Planning Design
10.
1 Introduction
Motivation Example Sitting Problem
10.
2 Site-Planning Methodology Objective /Attribute Hierarchy Basic Assumptions First Assumption Second Assumption Third Assumption Fourth Assumption Performance Functions
10.
3 Site-Selection Criteria Physical Criteria Cultural Criteria Functional Criteria
10.
4 Manufacturing Site-Planning Examples Objective Function (Distance or Time) Site-Planning Example
10.
5 Factory Project Case Study Soils Slopes Views Evaluation Site Drainage Final Summary Evaluation Factory Project Site- Planning Example
10.
6 Summary and Conclusions
10.
7 Exercises References Office and Personnel Layout Planning
11.
1 Introduction
History Outline of
Chapter 11.
2 Office Spatial Organization Problem General Functions of Office
11.
3 Office Space Guidelines Ancillary Space Guidelines Miscellaneous Areas of Offices
11.
4 Personnel Requirements and Office Arrangements Personnel Requirements Types of Office Arrangements Example Office layout
11.
5 Utility Company office case Study Alternative1 Alternative 2 Alternative 3 Alternative 4 Analysis and conclusions
11.
6 Factory Design Project:
Section IV. Personnel Requirements and Calculation of Product Total Unit Cost Conceptual Overview Organization of Report Positions and Job Descriptions
11.
7 Factory Design Project:
Section V. Office Layout Planning Overall Conceptual Approach Report Organization Selected Office Layout
11.
8 Summary and conclusions
11.
9 Exercises References Final Synthesis

Detaljer Om Varen

  • 1. Udgave
  • Vital Source E-book: 472 sider
  • Udgiver: Pearson International (Oktober 2013)
  • ISBN: 9781292053110

For undergraduate courses in facilities planning and material handling.

 

Based on ten years' teaching experience, this text takes a practical, teachable approach to facilities planning and design. A class design project centered on a factory incorporates the theoretical aspects of facilities planning and design. Motivating and illustrating mathematical models wherever possible, the text explores facilities planning, capstone design, and even simulation modelling.

Licens varighed:
Online udgaven er tilgængelig: 365 dage fra købsdato.
Offline udgaven er tilgængelig: ubegrænset dage fra købsdato.

Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 2 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)
De oplyste priser er inkl. moms

Om denne ebog

Please note that this is a Vital Source ebook, which you can access both online and download to a compatible device.

You will need Vital Source ebook software to download it - this is free and you download it here

Om denne ebog

Please note that this is a Vital Source ebook, which you can access both online and download to a compatible device.

You will need Vital Source ebook software to download it - this is free and you download it here

Om denne ebog

Please note that this is a Vital Source ebook, which you can access both online and download to a compatible device.

You will need Vital Source ebook software to download it - this is free and you download it here

Om denne ebog

Bemærk: Dette er en Vital Source e-bog, som kan læses offline i Bookshelf ebogslæseren - og online med en browser i en begrænset periode. (Se den enkelte bog for mere information.)

 

Bookshelf læseren findes til forskellige systemer, er gratis og kan downloades her.  

 

For mere information om anskaffelse og brug af Vital Source ebøger, klik her.

Polyteknisk Boghandel

har gennem mere end 50 år været studieboghandlen på DTU og en af Danmarks førende specialister i faglitteratur.

 

Vi lagerfører et bredt udvalg af bøger, ikke bare inden for videnskab og teknik, men også f.eks. ledelse, IT og meget andet.

Læs mere her


Trykt eller digital bog?

Ud over trykte bøger tilbyder vi tre forskellige typer af digitale bøger:

 

Vital Source Ebog: En velfungerende ebogsplatform, hvor bogen downloades til din computer og/eller mobile enhed.

 

Du skal bruge den gratis Bookshelf software til at læse læse bøgerne - der er indbygget gode værktøjer til f.eks. overstregning, notetagning mv. I langt de fleste tilfælde vil du samtidig have en sideløbende 365 dages online adgang. Læs mere om Vital Source bøger

 

Levering: I forbindelse med købet opretter du et login. Når du har installeret Bookshelf softwaren, logger du blot ind og din bog downloades automatisk.

 

 

Adobe ebog: Dette er Adobe DRM ebøger som downloades til din lokale computer eller mobil enhed.

 

For at læse bøgerne kræves særlig software, som understøtter denne type. Softwaren er gratis, men du bør sikre at du har rettigheder til installere software på den maskine du påtænker at anvende den på. Læs mere om Adobe DRM bøger

 

Levering: Et download link sendes pr email umiddelbart efter købet.

 


Ibog: Dette er en online bog som kan læses på udgiverens website. 

Der kræves ikke særlig software, bogen læses i en almindelig browser.

 

Levering: Vores medarbejder sender dig en adgangsnøgle pr email.

 

Vi gør opmærksom på at der ikke er retur/fortrydelsesret på digitale varer.