Find andre bøger

Titel eller forfatter eller ISBN

Viser: Physical Models - Their Historical and Current Use in Civil and Building Engineering Design

Physical Models, 1. udgave
Søgbar e-bog

Physical Models Vital Source e-bog

Bill Addis, Karl-Eugen Kurrer og Werner Lorenz
(2020)
John Wiley & Sons
1.544,00 kr.
Leveres umiddelbart efter køb
Physical Models - Their Historical and Current Use in Civil and Building Engineering Design

Physical Models

Their Historical and Current Use in Civil and Building Engineering Design
Bill Addis, Karl-Eugen Kurrer og Werner Lorenz
(2020)
Sprog: Engelsk
Wilhelm Ernst & Sohn Verlag fur Architektur und Technische
1.988,00 kr.
ikke på lager, Bestil nu og få den leveret
om ca. 10 hverdage

Detaljer om varen

  • 1. Udgave
  • Vital Source searchable e-book (Reflowable pages)
  • Udgiver: John Wiley & Sons (September 2020)
  • Forfattere: Bill Addis, Karl-Eugen Kurrer og Werner Lorenz
  • ISBN: 9783433609637
Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Licens varighed:
Bookshelf online: 5 år fra købsdato.
Bookshelf appen: ubegrænset dage fra købsdato.

Udgiveren oplyser at følgende begrænsninger er gældende for dette produkt:
Print: 10 sider kan printes ad gangen
Copy: højest 2 sider i alt kan kopieres (copy/paste)

Detaljer om varen

  • Hardback: 1114 sider
  • Udgiver: Wilhelm Ernst & Sohn Verlag fur Architektur und Technische (November 2020)
  • Forfattere: Bill Addis, Karl-Eugen Kurrer og Werner Lorenz
  • ISBN: 9783433032572
Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available.
The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s.
Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated.
The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Preface Construction History Series (by Karl-Eugen Kurrer) Foreword (by Werner Sobek) Introduction (by Bill Addis) SECTION A - PHYSICAL MODELS FROM ANCIENT TIMES TO THE 1880s 1 Dirk Bühler: Models in civil engineering from ancient times to the Industrial Revolution 2 Santiago Huerta: Block models of the masonry arch and vault 3 Rainer Graefe: The catenary and the line of thrust as a means for shaping arches and vaults 4 Andreas Kahlow: Leonhard Euler and the model tests for a 300 metre timber arched bridge in St. Petersburg 5 Dennis Smith: The use of models in early nineteenth-century British suspension bridge design 6 Bill Addis: Models used during the design of the Conwy and Britannia tubular bridges SECTION B - PHYSICAL MODELS USED IN STRUCTURAL DESIGN, 1890s-1930s 7 Mike Chrimes: The use of models to inform the structural design of dams, 1890-1940 8 Bill Addis: Models used during the design of the Boulder Dam 9 Roland May: The role of models in the early development of Zeiss-Dywidag shells 10 Mario Chiorino & Gabriele Neri: Model testing of structures in pre-war Italy; the School of Arturo Danusso 11 Joaquin Antuna: Eduardo Torroja and his use of models up to 1936 12 Bill Addis: Photoelastic stress analysis SECTION C - PHYSICAL MODELS USED IN STRUCTURAL DESIGN, 1940s TO 1980s 13 Bernard Espion: Structural modelling technique 14 Christiane Weber: Physical modelling at the University of Stuttgart 15 Mario Chiorino & Gabriele Neri: Model testing of structures in post-war Italy: the activity of ISMES 1951-1974 16 Joaquin Antuna: Eduardo Torroja and his use of models from 1939 17 Edwin Trout: Scale models for structural testing at the Cement and Concrete Association, UK: 1951-73 18 Pepa Casinello: Heinz Hossdorf: his contribution to the development of physical model testing 19 Berthold Burkhardt: Soap film and soap bubble models 20 Lukas Ingold: The model as an ideal building: the origins of the design methods of Sergio Musmeci 21 John Chilton: Heinz Isler and his use of physical models 22 Ian Liddell: Models for the design development, engineering and construction of the Multihalle for the 1975 Bundesgartenschau in Mannheim SECTION D - PHYSICAL MODELS USED IN NON-STRUCTURAL ENGINEERING DISCIPLINES 23 Bill Addis: The historical use of physical model testing in free-surface hydraulic engineering 24 Bill Addis: The historical use of physical model testing in wind engineering 25 Bill Addis: The historical use of physical model testing in earthquake engineering 26 Raf Orlowski: The historical use of models in the acoustic design of buildings 27 Bill Craig: Geotechnical centrifuge models ? a history of their role in pre-construction design SECTION E - PHYSICAL MODELLING IN THE TWENTY-FIRST CENTURY 28 Mamoru Kawaguchi: Physical models as powerful weapons in structural design 29 Bruce Martin: Physical modelling of structures for contemporary building design 30 David Wendland: Using physical models in the design of complex masonry structures 31 James Sutherland: Physical modelling of free surface water ? current practice 32 Francesco Dorigatti: Boundary-layer wind tunnel model testing ? current practice 33 Amarnath Kasalanati: Model testing using shake tables ? current practice 34 Raf Orlowski: The use of physical models in acoustic design ? current practice 35 David White: Geotechnical centrifuge modelling ? current practice 36 Owen Connick: Water-bath modelling ? small-scale simulation of natural ventilation flows 37 Jan Knippers: The use of biological models for building engineering design 38 Mamoru Kawaguchi: Flying a 100 metre long Jumbo Koinobori 39 Dirk Bühler & Christiane Weber: Epilogue: A future for models from the past APPENDICES - Earliest writings in engineering literature about scaling and the use of reduced-scale models A1 Original source 15BC Vitruvius. A2 Original source 1638 Galileo. A3 Original source 1772 Leonard Euler. A4Original source 1801 Report on Telford?s arch bridge across the Thames A5 Original source 1846 Short article on models in The Builder. A6 Original source 1847 Short article in Civil Engineer and Architects? Journal. A7 Original source 1887
part of paper by Osborne Reynolds. 100 AUTHOR BIOGRAPHIES